This is a fully adjustable gearbox crossmember which suits all Nissan Y60 GQ and Y61 GU Patrols.
We have designed the crossmember to be used in as many different applications as possible:
- Factory replacement,
- Extra front tail shaft clearance
- Increased exhaust clearance
- Fitment of different engines and transmissions that require the transfer case to be moved forward or rearwards.
This crossmember is perfect when doing a 6lt LS V8 and 6L80 conversion into a ZD30 auto vehicle with our bolt in engine mount kit where the transmission needs to move back to the ZD30 manual gearbox position.
If you are fitting an LSA and 6L90 transmission to your Patrol our crossmember will allow you to move the transfer case back the extra 35mm required with the longer 6L90 gearbox.
The crossmember comes pre-assembled ready to be fitted and adjusted to suit your application. Depending on your model you can unbolt the 10mm side plates if needed.
Factory Nissan transmission mounts are used. Now would be a good time to replace them if they are worn - factory Nissan part number 11320-01J00
The crossmember is made in Australia by Marks 4WD in Melbourne.