Bell Housing Adaptor Kit – Chev V8 Diesel to LandCruiser FJ Petrol (Manual)

AUD $2,350.00 (Excl. Tax AUD $2,136.36)

In stock

Bell Housing Adaptor Kit to suit Chev V8 diesel (168 tooth flywheel) to Toyota LandCruiser fitted with a factory manual gearbox

To Suit

  • F – 3.9L 4-speed manual
  • 2F – 4.2L 4 or 5-speed manual
  • 3F – 4.0L 5-speed manual
Brands:
SKU: MFK560CD
Marks 4WD

Bell Housing Adaptor Kit to suit Chev V8 Diesel to Toyota LandCruiser FJ Petrol (Manual Gearbox)

Chev V8 fitted with 168T flywheel

to FJ40, FJ45, FJ55, FJ60, FJ70 & FJ75 4 and 5-Speed Manual Kit part no. MFK560CD utilises the GM flywheel and clutch (MCK605CD) along with the Toyota bell housing. Instead of a new bell housing, a flywheel housing is supplied which measures 122 mm/4.8″ long. This housing has the GM bolt pattern on the front and the Toyota 1F, 2F, and 3F, bolt pattern on the rear.

The kit has been designed to allow for firewall clearance without shifting the transmission or altering the drive shaft lengths.

The gearbox input shaft is coupled to the clutch via an input extension shaft. The shaft has the Toyota internal spline and spigot diameter on the gearbox end with the GM external spline and spigot diameter on the engine end. The front of the shaft is supported in the crankshaft by a sealed ball bearing inside an adaptor ring. The clutch is operated through a thrust bearing extension sleeve, which is supported in a machined boss located in the centre of the housing. On the front of the sleeve is a thrust bearing to suit the GM clutch pressure plate.

 

Kit Includes

  • Adaptor flywheel housing
  • Input extension shaft
  • Adjustable thrust bearing extension carrier
  • Thrust bearing
  • Clutch fork pivot
  • Flywheel cover plate
  • Spigot bearing & adaptor
  • Oil pressure sender adaptor
  • Water temp sender adaptor
  • Bolts, Washers
  • Downloadable Instructions (requires login)

 

To Suit

  • Toyota LandCruiser FJ40, FJ45, FJ55, FJ60, F70, FJ75 (5-speed manual gearbox)

 

Notes

  • Suits Chev V8 168 tooth flywheel
  • We recommend using a single serpentine fan belt and reverse driven water pump to provide additional clearance between the fan and radiator.
  • The kit can be used on HJ series vehicles however additional parts will be required including a 2F or 3F bell housing, clutch slave cylinder, clutch fork, etc

    Contact Us



    Customers reviews

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.

    MFK560C Instructions

    Download / View

    Search...

    Back to Top
    Save Your Cart
    Share Your Cart
    Product has been added to your cart