Marks 4WD Adaptors is an Australian company, specialising in the design and manufacture of quality accessories that enhance the off road performance of four wheel drive vehicles. 

This kit is designed to increase the front wheel track of a solid axle Toyota by 66mm/2.6". A pair of standard IFS 4Runner hubs are required for the conversion, used ones can be purchased from your local 4WD wrecker or alternatively new ones can be used.

The kit can be used on Toyota Land Cruiser models including 40, 55, 60 and 70 series live axle leaf spring models. It can also be used on Toyota Hilux Live axle models. To increase the rear differential track a later model diff can be fitted.

If your vehicle is fitted with solid brake rotors you can upgrade them to vented type as fitted to later 60 series models.

The kit consists of two disc rotor spacers, dowels and bolts. These parts are fitted to the disc rotor side of the IFS hub, this spaces the disc back into is original position allowing the original calliper to be fitted.

Toyota Axle widening kit

Toyota Axle Widening kit.
	PART NO. MFK1630 RRP AU$350 inc GST The Kit consists of: 2 disc spacers, 12 high tensile bolts, and 4 dowels.

Toyota Vented Discs

Toyota Vented Discs.
	PART NO. MFK1630VD RRP AU$100 inc GST The Kit consists of: 2 Vented Discs.

Toyota Disc Brake Callipers

Toyota Disc Brake Callipers.
	PART NO. MFK1630DC RRP AU$650 inc GST The Kit consists of: Left and Right Disc Brake Callipers.

Toyota Disc Pads

Toyota Front Disc Pads.
	PART NO. MFK1630DP RRP AU$55 inc GST The Kit consists of: Set of Front Disc Pads.