
12 VOLT
IMPACT WRENCH
Last Updated: 26/09/06
THROW AWAY YOUR WHEEL BRACE!
& USE A SHENTAI 12-VOLT IMPACT WRENCH
NEVER GET CAUGHT AGAIN WITH A FLAT TYRE & WHEEL NUTS YOU CANNOT LOOSEN!
Plug the amazing Shentai 12- Volt Impact Wrench into the cigarette lighter of your car and see how easily it works, producing as much torque as a garage "rattle gun" - 340Nm or 250ft/lbs. There is virtually no recoil and removes or tightens a wheel nut in 3-4 seconds. You don't even need to loosen the wheel nuts before raising the vehicle!. An attachment is supplied in the kit for direct connection to the vehicle battery if required. Supplied with four metric sockets including 17mm, 19mm, 21mm, and 23mm to fit most wheel nuts.
You will quickly be back on the road without the strain and leverage usually required to undo over tightened wheel nuts. The Shentai 12-Volt Impact Wrench is a simple, practical and robust tool designed for anyone on wheels, reducing time, effort & strain.
A must have accessory for any car or 4WD!
A four meter extension lead for the cigarette lighter outlet is also supplied in the kit. This extension lead is very useful as it can enable the impact wrench to be used on trailer or caravan wheels. It can also be used with any 12v accessory normally powered by the cigarette lighter outlet.
The photographs below show the impact wrench complete with a convenient carry case.
The outstanding performance of this tool finds us using one in our workshop to undo the large nuts and bolts that our 1/2" pneumatic rattle gun just refuses to budge. The photo below is a good example of its capability as it easily removes the output shaft nut on the back of a Nissan transfer case. To undo this nut manually, usually requires a breaker bar with a 1mtr/3ft tube extension, two people and lots of grunting.
Part Number is As Follows:
Impact Wrench Kit
|
||
|
PART NO. IMPACT
RRP AU$99.00 inc GST The kit consists of: Impact wrench (1/2" drive), battery attachment, 3" long 1/2" drive extension, hub cap removing tool, 4mtr extension lead, 17mm, 19mm, 21mm, and 23mm sockets, spare fuse, and instructions. |
||
Copyright © 2006
Marks 4WD Adaptors
Last modified:
September 26, 2006