Com VN S1 Automatic

NOTE: To enable any Commodore V6 engine to be fitted to this vehicle you must change the transmission to either a later model 5-speed, Marks 4WD heavy duty 5-speed or the TH700 Automatic transmission from a Commodore.

Commodore V6 VN Series 1 Automatic Engine Requirements

You will need to obtain the following components.

The Commodore V6 engine complete with, the main engine wiring harness, the ECM computer and mem-cal. Other accessories such as, the map sensor, purge canister (carbon canister), air cleaner and ducting if required, air conditioning compressor if required (if not they make a great air compressor), power steering pump, engine pipes with O2 sensor and catalytic converter, external fuel pump and damper.

If you are fitting the V6 engine to a 5-speed you will require the V6 flex plate.

If you are fitting the TH700 automatic transmission the flex plate and starter will also be required.

Note: The series one VN engines have two crankshaft bolt patterns and starter motor types, the manual transmission type and the automatic transmission type. For this reason flywheels are not interchangeable.

For more information regarding the following kits just click on the part number.