Commodore V6 VS Engine Requirements You will need to obtain the following components. The Commodore V6 engine complete with, the main engine wiring harness, the PCM computer and mem-cal. Other accessories such as, the mass air flow sensor, purge canister (carbon canister), air cleaner and ducting if required, air conditioning compressor if required (if not they make a great air compressor), power steering pump if required, engine pipes with O2 sensors and catalytic converter. If you are fitting the V6 engine to a 5-speed you will require a solid (not dual mass) flywheel and starter motor (reduction type) if you can't find one the V6 automatic flex plate can be used with our flywheel and starter motor combinations. If you are fitting the 4L60E automatic transmission the flex plate and starter will be required.

For more information regarding the following kits just click on the part number.

See also MFK354-E and MFK354-E6 Information

---

See also CHANGER OVER DEPOSIT Information

---

See also MFK677 Information

---

See also MFK1022 Information

---

See also MFK715/5 Information

---

See also MFK129/B and MFK129 Information

---

See also MFK130P Information

---

See also MES768 Information

---

See also MFK1247EC and MFK1247SC and MFK1480 Information

---

See also MCK129 and MFK1645 and MFK1359R Information

---

See also MFK648ST Information

---

See also MFK696 and MFK696E and MFK1470 and MFK1470H Information

---

See also MFK1453EC Information

---

See also MFKSIM01 Information

---

See also MFK682 and MFK683 Information

---

See also MFK6823 and MFK1410 and MFK1410B Information

---

See also MFK1201 and MFK1403S1 and MFK1418 and MFK1249/3 Information

---

See also MFK1145/H Information

---

See also MFK950 Information

---

See also MERHL4 Information

---