Commodore VR Manual and Auto V6 Engines
to
Toyota Hilux LN60/61/65/106/107/111/130/167/172 (Engine 2L,2.4ltr, 3L,2.8ltr & 5L 3ltr Diesel 5-speed) with leaf spring front end (live axle).
|
Commodore V6 VR Engine Requirements
You will need to obtain the following components. The Commodore V6 engine complete with, the main engine wiring harness, the ECM computer and mem-cal for manual engines, PCM computer and mem-cal for auto engines. Other accessories such as, the map sensor, purge canister (carbon canister), air cleaner and ducting if required, air conditioning compressor if required (if not they make a great air compressor), power steering pump if required, engine pipes with O2 sensor and catalytic converter. If you are fitting the V6 engine to a 5-speed you will require the flywheel and starter motor (reduction type) if you can't find one the V6 automatic flex plate can be used with our flywheel and starter motor combinations. If you are fitting the 4L60E automatic transmission the flex plate and starter will be required. You will also require a 24mm diameter VSS from a VS or later transmission. |
| For more information regarding the following kits just click on the part number. |
| Hilux G52 5 Speed | Marks H/Duty 5 Speed | VR 4L60E Automatic | |||||
| Part No. | Description | AU$ Price inc. GST | AU$ Price inc. GST | AU$ Price inc. GST | |||
| MFK354E | 4L60E to Hilux 5-speed gear drive transfer case | ||||||
| C/O | Change over deposit | ||||||
| MFK677 | Oil pressure adaptor | ||||||
| MFK1022 | Water temperature adaptor | ||||||
| MFK715/5 | Heavy duty 5-speed transmission | ||||||
| MFK129/B | Bell housing kit to suit heavy duty 5-speed transmission | ||||||
| MFK129 | Bell housing Kit to Hilux petrol or diesel 4-cylinder 5-speed. | ||||||
| MFK130 | Engine Mount Kit Commodore V6 to Hilux 18R, 22R and all diesel models with leaf spring front suspension | ||||||
| MFK1247S2 | Flywheel to suit Commodore VN S2, VP & VR Automatic V6 engines | ||||||
| MFK1480 |
S |
||||||
| MCK129 | Heavy duty clutch kit | ||||||
| MFK1645 | Clutch master cylinder & adaptor kit all models | ||||||
| MFK648D | Commodore V6 VN, VP, and VR engine interface loom diesel models | ||||||
| MFK696 | Hall effect (3 wire) VSS to suit cable driven speedometers (VR manual engines only) | ||||||
| MFK696E | Hall effect (3 wire) VSS Interface Module to suit vehicles with Hall effect (3 wire) electronic speedometers | ||||||
| MFK1470 |
Inductive (2 wire) VSS to suit cable driven
speedometers. |
||||||
| MFK1470H |
Inductive (2 wire) VSS to suit cable driven
speedometers. |
||||||
| MFK1453 | Diagnostic test light to suit VN, VP, VR | ||||||
| MFKSIM01 | Commodore V6 and V8-VR-VS BCM Simulator | ||||||
| MFK682 | Under bonnet, bracket kit suits all models | ||||||
| MFK683 | High pressure, fuel pump and bracket kit suits all models | ||||||
| MFK6823 | Complete Fuel and bracket kit suits all models | ||||||
| MFK1410 | Surge Tank and Electronic Fuel Pump Kit to suit all models | ||||||
| MFK1201 | Engine cooling kit (Electric Fans) | ||||||
| MFK1403S1 | Engine cooling kit (Engine Driven Fan) | ||||||
| MFK1418 | 35mm wide fan Shroud kit (To Suit Engine Driven Fan) (optional) | ||||||
| MFK1416DA | Engine driven, Fan Shroud to suit Commodore V6 engines in Hilux/4-Runner & Bundera Diesel models (optional) | ||||||
| MFK1145/H | Shifter mounting and display kit to suit TH700/4L60E into Toyota Hilux 4/Runner pre 1988 (optional) | ||||||
| MFK1145/4R | Shifter mounting and display kit to suit TH700/4L60E into Toyota Hilux, 4/Runner 1988 on (optional) | ||||||
| MFK1249/3 | 3 core heavy-duty radiator (optional) | ||||||
| MERHL4 |
Replacement engine mount rubbers to suit all Hilux/4-Runner |
||||||
Copyright © 2006
Marks 4WD Adaptors 
Last modified:
July 28, 2008