Commodore VN Series 1 Automatic V6 Engine
to
Toyota Hilux RN105/106/110/130 (Engine 22R,2.4ltr Petrol 5-speed) with leaf spring front end (live axle). Manufactured 1988 on
|
Commodore V6 VN Series 1 Automatic Engine Requirements
You will need to obtain the following components. The Commodore V6 engine complete with, the main engine wiring harness, the ECM computer and mem-cal. Other accessories such as, the map sensor, purge canister (carbon canister), air cleaner and ducting if required, air conditioning compressor if required (if not they make a great air compressor), power steering pump, engine pipes with O2 sensor and catalytic converter, external fuel pump and damper. If you are fitting the V6 engine to a 5-speed you will require the V6 flex plate. If you are fitting the TH700 automatic transmission the flex plate and starter will also be required. Note: The series one VN engines have two crankshaft bolt patterns and starter motor types, the manual transmission type and the automatic transmission type. For this reason flywheels are not interchangeable. |
| For more information regarding the following kits just click on the part number. |
| Hilux G52 5 Speed | Marks H/Duty 5 Speed | VN Series 1 TH700 Automatic | |||||
| Part No. | Description | AU$ Price inc. GST | AU$ Price inc. GST | AU$ Price inc. GST | |||
| MFK354 | TH700R-4 to Hilux 5-speed gear drive transfer case | ||||||
| MFK1065 | TH700R-4 to Hilux/4-Runner 26t spline chain driven transfer case fitted with a 5-speed gearbox | ||||||
| MFK1065S | TH700R-4 to Surf 23t spline chain driven transfer case fitted with a 5-speed gearbox | ||||||
| C/O | Change over deposit | ||||||
| MFK677 | Oil pressure adaptor | ||||||
| MFK1022 | Water temperature adaptor | ||||||
| MFK715/5 | Heavy duty 5-speed transmission | ||||||
| MFK129/B | Bell housing kit to suit heavy duty 5-speed transmission | ||||||
| MFK129 | Bell housing Kit to Hilux petrol or diesel 4-cylinder 5-speed. | ||||||
| MFK130 | Engine Mount Kit Commodore V6 to Hilux 18R, 22R and all diesel models with leaf spring front suspension | ||||||
| MFK1247SI | Flywheel to suit Commodore VN Series 1 Automatic V6 | ||||||
| MFK1480 |
S |
||||||
| MCK129 | Heavy duty clutch kit | ||||||
| MFK1645 | Clutch master cylinder & adaptor kit all models | ||||||
| MFK1359R | Clutch pipe crossover kit right to left | ||||||
| MFK648 | Interface Loom for Commodore V6 VN, VP, and VR engines | ||||||
| MFK696 | Hall effect VSS to suit cable driven speedometers | ||||||
| MFK696E | VSS Interface Module to suit vehicles with electronic speedometers | ||||||
| MFK1453 | Diagnostic test light to suit VN, VP, VR | ||||||
| MFK682 | Under bonnet, bracket kit suits all models | ||||||
| MFK683 | High pressure, fuel pump and bracket kit suits all models | ||||||
| MFK6823 | Complete Fuel and bracket kit suits all models | ||||||
| MFK1410 | Surge Tank and Electronic Fuel Pump Kit to suit all models | ||||||
| MFK1201 | Engine cooling kit (Electric Fans) | ||||||
| MFK1403S1 | Engine cooling kit (Engine Driven Fan) | ||||||
| MFK1418 | 35mm wide fan Shroud kit (To Suit Engine Driven Fan) (optional) | ||||||
| MFK1145/4R | Shifter mounting and display kit to suit TH700/4L60E into Toyota Hilux, 4/Runner 1988 on (optional) | ||||||
| MFK1249/3 | 3 core heavy-duty radiator (optional) | ||||||
| MFK950 | Tachometer interface to suit Hilux 4-cylinder petrol tacho (optional) | ||||||
| MERHL4 |
Replacement engine mount rubbers to suit all Hilux/4-Runner |
||||||
Copyright © 2006
Marks 4WD Adaptors 
Last modified:
July 28, 2008