My Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

bool(false) index---noRoute
Switch-Pros Bezel Style 8 Switch Panel Power System - SP8100B
  • The set-up is plug and play and the installation only requires a few connections.
  • Wiring Loom for Switch-Pros 8 Switch Panel Power System SP8100B
  • Switch-Pros 8 Switch Panel installed neatly into the console

Switch-Pros 8 Switch Panel Power System - Bezel Style

Part Number: SP8100B

Availability: In stock

Quick Overview

Switch-Pros Bezel Style 8 Switch Panel Power System

  • 8 user programmable switch panel
  • Adjustable back lighting
  • Bluetooth or panel programming
  • 7 x 18amp & 1 x 30amp outputs
  • Programmable switches - on/off or momentary
  • Dimming for lighting outputs
  • External trigger to activate up to 2 outputs
  • Battery voltage display on app screen
$795.00

Details

Newly released to the market the Switch Pros 8 Switch Panel Power System

The SP8100B has eight user-programmable switches that can be programmed to be: On/Off, Momentary, ignition or battery powered, flash, strobe, low voltage disconnect, and memorise previous settings.
The unit is supplied with 50 labels which covers nearly all applications, the switches have a green LED back light which is user adjustable. The switch panel is water resistant / splash proof perfect for 4WD applications.

Programming of the unit can be done at the panel or via the smart phone app. The unit can also be controlled through the smart phone app. via bluetooth. The switches are programmable; On/Off or momentary, ignition or constant source, flash and strobe functions, low voltage disconnect, and switch memory.

The 100A power module is built with solid-state automotive components and uses no mechanical relays or fuses. It is fully sealed and waterproof which means it can be mounted in the cabin or in the engine compartment. The SP8100B is also equipped with automatic shut down for over-current and low battery voltage. The module has 8 output leads which are 90cm in length. With the unit installed you don't require any additional relays (unless you require over 18 or 30amps) which saves heaps of valuable space and cleans up your engine bay.

The set-up is plug and play and the installation only requires a few connections. Mounting brackets and all fixings are supplied.

The unit is covered by a full 2 year manufacturers replacement warranty.

Switch-Pros also have an installation guide and wiring diagram which you can download below.

Installation Guide Wiring Diagram

Specifications

Switch Panel:

  • 100mm L x 50mm W x 12mm H (excluding tabs)
  • Black anodised aluminium finish
  • Adjustable green LED back light
  • Orange LED switch indicators
  • 1.2m lead length

Power Module:

  • 150mm L x 75mm W x 12mm H (excluding connector)
  • Black anodised aluminium finish
  • 8 configurable outputs
  • 7 outputs rated @ 18amps (12v @ 216 watts)
  • 1 output rated @ 30amps (12v @ 360 watts)
  • 100 amp maximum rating 125°C to -40°C
  • 16-pin sealed automotive connector
  • Wire harness with 100A fused power cable, light and ignition input wires, and eight 90cm long output wires

Ask for more information about this product

* Required Fields