FYRLYT LUXSIS 5000 150w Driving Lights – PAIR


FYRLYT LUXSIS 5000 150W Driving Lights – Fully Australian designed & manufactured by FYRLYT, a specialist light designer and manufacture.


  • Instant Startup
  • 42% more CRI than typical LED or HID’s (The higher the CRI the more natural color objects will appear under lighting)
  • A higher total light volume with a lower price than HID and LED options
  • Replaceable Lenses
  • Reduced glare and fatigue compared to when using LED lights
  • 5000 Lumens per light
  • Integrated Spread or Spot beam

You have seen the rest – now try the best.

Why use cheap chinese LED or HID lights when you can buy quality Australian made products at a reasonable price.

SKU: 16000
Brands: FYRLYT
View cart


These lights are fully serviceable and spare parts are readily available.

Optimal voltage for a FYRLYT 150w globe is 13.2v
Anything lower than 13.2v will result in a lower light output. Our loom tested on a Toyota LandCruiser with 14.1v at the battery had 13.7v at the lights. This gives an increase of around 500 lumens for each light.

Kit Contains:

  • 2 x 150w FYRLYT Driving Lights
  • Stainless Steel Bolt & Nylock Nut
  • Plug Lead
  • Fitting Instructions

Filament Tuned Reflector

The Filament Tuned Reflector FTR has been geometrically optimised to realise the full potential of the Luminous Flux produced by the light source, directing more light where it is needed. Manufactured from aluminium with a robust base and hard top coat, the FYRLYT reflector possesses exceptionally high spectral reflectance whilst being scratch, chemical and heat resistant.

Quick Change Sacrificial Lens

The lens has been designed to be readily replaceable without tools, making lens covers redundant. With FYRLYT the lens and cover are one and the same. This eliminates the compounding light losses induced by the 2 redundant plastic to air surface transitions that come with transparent lens covers. This with the reduction in operating temperature is valuable in maximising light performance. The simple lens removal also allows for the bulb to be changed from the front of the light if the mounting limits rear access.

Integrated Quick Change Bulb and Heat Sink

Management of the operating temperature of high performance lights is crucial. FYRLYT has integrated a quick release system for fast bulb change with a high performance aluminium alloy heat sink, manufactured from T6060-T5. This feature is an essential component in facilitating the use of high performance light sources whilst maintaining acceptable operating temperatures.

Integrated Spread or Spot Beam

The Integrated Spread or Spot beam, provides two factory set beam patterns in the one light that can be adjusted to suit the driving conditions in seconds by pushing and rotating bulb holder.

Gore®Vent Breather

The Gore®Vent breather reduces the possibility of water ingress when operated in moist air whilst paradoxically providing a seal if the light is submerged. This is achieved by its breathing characteristics which provides a means to maintain a near to equilibrium air pressure to that of ambient by releasing pressure caused by the temperature rise when the light is in use. Conversely it allows an inflow of air when it cools to eliminate the creation of a significant vacuum within the light.

Billet Machined Aluminium Alloy Base

The billet machined Aluminium Alloy (T6060-T5) base maintains its impact strength at extremely low temperatures unlike some metals and plastics, whilst providing exceptional resistance to vibration. This ensures the light maintains the set position in the most adverse operating conditions. In addition it provides infinitely variable adjustment within a 25 mm range and is also reversible.

Hard Coated Optical Surfaces

The Hard coating applied to both the lens and reflector optical surfaces provides improved chemical and scratch resistance to the base materials, maximising the longevity of the optical performance of the light. Premium driving lights are an investment you want to last!

Stainless Steel Fasteners

The fasteners and spring in FYRLYT are manufactured from austenitic stainless steels for optimum corrosion resistance. FYRLYT considers every potential scenario and utilises the best grade of materials for durability.

Injection Moulded Engineering Resins

The non metallic components of FYRLYT are manufactured from high impact reinforced and non reinforced engineering polymers with exceptionally high impact and fatigue characteristics. This coupled with higher than normal wall sections have created an extremely robust configuration. 400% thicker than a rivals 240 model!

FYRLYT Lights are Rebuildable

All components can be individually purchased as spares and thanks to smart design are simple to reassemble to as good as new.

    Contact Us


    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.