Engine mount kit - Commodore V6 to Hilux 2RZ & 3RZ petrol IFS

On the left hand side of the vehicle:
The chassis bracket is replaced with one supplied in the kit, this bracket utilises the standard Hilux mounting rubber and engine bracket supplied in the kit. This design allows the use of the standard GM air conditioning compressor if required. NOTE: The new chassis bracket comes in 3 pieces and must be welded to the chassis.

On the right hand side of the vehicle:
The chassis bracket is replaced with one supplied in the kit, this bracket utilises the standard Hilux/4Runner mounting rubber and is attached to the engine using the other bracket supplied in the kit. NOTE: The new chassis bracket must be welded to the chassis.

This kit is also supplied with brackets that relocate the steering damper under the track rod. They consist of a new chassis bracket that is welded to the chassis on the drivers side (right hand side). The other bracket supplied mounts the damper to the track rod.

NOTE 1: You will need to reuse the original Toyota engine mount rubbers.

NOTE 2: You will need to remove the original chassis posts from both sides of the chassis.

Kit contains:

• Left hand chassis bracket
• Left hand engine block bracket
• Right hand chassis bracket
• Right hand engine block bracket
• Steering damper relocation bracket
• Chassis steering damper mount
• Nuts
• Bolts
• Washers
• Instructions