Switch-Pros SP9100 Switch Panel Power System – Bezel Style

Sp9100 Panel Power System by Switch-Pros 8 Switch Panel Power System

The unit is supplied with 125 labels that cover nearly all applications, the switches have an RGB LED backlight which is user adjustable through the app. The switch panel is water-resistant/splash-proof perfect for 4WD applications.

Programming of the unit can be done at the panel or via the smartphone app. The unit can also be controlled through the smartphone app. via Bluetooth. The switches are programmable; On/Off or momentary, ignition or constant source, flash and strobe functions, low voltage disconnect, and switch memory. You also get a battery voltage readout on the app.

The 125A power module is built with solid-state automotive components and uses no mechanical relays or fuses. It is fully sealed and waterproof, which means it can be mounted in the cabin or in the engine compartment. The SP9100-D is also equipped with automatic shutdown for over-current and low battery voltage. The module has 8 output leads which are 90cm in length. With the unit installed, you don’t require any additional fuses or relays (unless you require over 20 or 35amps), which saves heaps of valuable space and cleans up your engine bay.

The setup is plug and play with the installation only requires a few connections. Mounting brackets and all fixings are supplied. The unit has two external trigger inputs (high beam etc), which can each activate up to 4 outputs (they can be active high, or low)

The unit is covered by a full 2-year manufacturer’s replacement warranty.

Switch Panel Specifications

• Built-In Bezel Style Switch Panel enclosure measures 101.6mm L x 50.8mm W x 9.07mm H, includes concealed mounting hardware for factory-look installation
• 101.6mm L x 50.8mm W x 9.07mm H
• Black anodised aluminium finish
• RGB Backlighting provides unlimited colour options, allows for exact matching to factory dash lighting
• Orange LED switch indicators – adjustable brightness
• 1.2m lead length

Power Module Specifications

• 150mm L x 75mm W x 12mm H (excluding connector)
• Black anodised aluminium finish
• 8 configurable outputs
• 4 outputs rated @ 20amps (12v @ 240 watts)
• 4 output rated @ 35amps (12v @ 420 watts)
• 125 amp maximum rating 125°C to -40°C
• LED Input Status Indicators for easy troubleshooting
• Waterproof and Solid State
• Wire harness with 125A fused power cable, light and ignition input wires, and eight 90cm long output wires

Kit Includes

• RCR-Touch®8
• 125 User-selectable switch legends
• Eight user-programmable switches
• Four 35A circuits and four 20A circuits
• Waterproof, Solid State 125A Power Module
• RGB Backlighting provides unlimited colour options, using Color Picker on App
• Daisy Chain up to 3 Switch Panels to One Power Module to allow control of your 8 outputs from up to 3 locations on your vehicle
• Switches can be programmed for:
  • • On/Off or Momentary
    • Ignition or Battery Input
    • Flash or Strobe, with User-Selectable Strobe patterns and One Touch activation.
    • Memory Function
    • Master Mode, with the ability to turn multiple outputs On AND Off with one-touch
    • Automatic Power-Up upon vehicle start-up
• Two External trigger inputs can each activate up to four outputs (Active High or Active Low)
• Lighting outputs can dim from 100% to 10%, with the ability to dim during Flash or Strobe patterns
• Sleep Mode for minimal power consumption
• colour-coded circuit wires
• LED Input Status Indicators for easy troubleshooting
• Time Delay Off function available for all circuits
• Splash-proof switch panel with Polycarbonate overlay faceplate
• Program and control the system from the switch panel pad or smartphone
• Bluetooth interface with FREE Apple or Android App
• Battery Voltage Readout on App screen
• No Fuses or Bulky Relay box
• Built-In Bluetooth Module
• Downloadable Instructions

Additional Labels

• Refer to – Vertical Switch Legend for Switch-Pros SP9100-D System