Free Freight

Catch Can & Diesel Fuel Water Separator kit by Ryco – Toyota Landcruiser 70 Series

A Ryco 4WD Filtration upgrade kit including catch can and pre fuel filter water separator.

To Suit

  • Toyota Landcruiser VDJ76, 78, 79 (03-2007 on)


  • May not fit when other aftermarket parts are installed in the same location. (Review photo’s for location)
SKU: X106R
Brands: Ryco

AUD$682.67 (Excl. Tax AUD$620.61)


Catch Can & Diesel Fuel Water Separator Kit by Ryco to suit Toyota LandCruiser VDJ70 series (X106)

With over 80 years of experience, Ryco Filters is the leading and most trusted automotive aftermarket brand for filters in Australia.

As an authorised supplier, Marks4wd is proud to offer Ryco’s 4×4 range of products backed by the support of Ryco Australia.


Fitting a quality catch can prevent contamination of your vehicle’s intake system from oil and crankcase vapours reducing your engine’s efficiency and eventually leading to possible engine damage.

Ryco’s Z980 series of pre-fuel separators are important to prevent water and contaminants from entering your factory fuel filter, providing additional protection for your engine.

The Australian-designed and engineered kits by Ryco are specifically made for each individual vehicle providing easy fitment using Ryco’s form-fitted hoses and quick-connect fittings.

Ryco catch cans utilise a high-efficiency filter removing oil droplets down to 1 micron while providing a low restriction to the factory PCV (positive crankcase ventilation) system.

The Ryco RCC351 catch has been tested to ISO standard 17536 (Vehicles aerosol separator test for internal combustion engines) and incorporates a large 310ml sump with an integrated safety valve.

Flowing 240L/min, the RCC351 makes it suitable for engines up to 350kw.




The Ryco Advantage

  • No drilling required (Fits into existing factory mounting points)
  • 3mm electrocoated steel mounting bracket
  • The Ryco Mounting Bracket, incorporating 3 x bolt locations, are designed to withstand the vibrations from demanding on and off-road conditions.
  • Ryco Catch Cans are tested to International Standard 17536 for evaluation of blowby oil aerosol separators and filtering devices.
  • Ryco’s RCC351 catch can utilise a large 310ml sump instead of capturing the contaminants in a drain line or depositing them back into the engine’s sump.
  • Vehicle-specific moulded PCV hoses for an OEM appearance
  • Ease of drainage using the supplied clear hose and drain valve or by removing the catch can from its quick-release bracket.
  • Class-leading filter efficiency with excellent gas flow. (Refer to the Efficiency Comparison Test in the photos)



  • Prevents oil and soot buildup from crankcase gases in intake manifolds, intercoolers and throttle bodies
  • Reduces maintenance of air intakes and EGR systems
  • Pre-Filters remove water and contaminants, maximising the protection of your fuel system.
  • Fits vehicles with dual batteries
  • Easy install with no drilling required. Fits existing factory mounting points.

Fitment Time

  • Approx. 1hr


Kit Includes

  • Ryco Fitment Kit – brackets, hoses, clamps (RVSK106)
  • Catch Can / Crankcase filter (RCC351)
  • Fuel Water Separator Filter (Z980K)
  • Drain Hose and Valve
  • Downloadable Instructions (requires login)


Replacement Filters

  • Fuel Water Separator Filter – Z980
  • Catch Can Filter – RCC151F



Catch Can

  • Inspect the Catch Can unit and drain any captured oil every 5,000 – 10,000 km. (Noting the frequency required will depend on your individual vehicle)
  • Replace the Catch Can filter element every 40,000 km.
  • Washing the filter element is not recommended as filter separation efficiency is significantly reduced.


Fuel Water Separator

  • Regularly check the fuel bowl for water contamination and drain any contaminated fluid


Compatible Vehicles

  • Toyota Landcruiser VDJ76, 78, 79 (03-2007 on)



  • May not fit when other aftermarket parts are installed in the same location. (Review photo’s for location)
  • Does not fit when using a Moonlight Air Box Kit
  • Note: Marks 4wd bonnet struts will foul on the mounting bracket – the bracket can be modified to clear

    Contact Us


    Be the first to review this product.

    Only logged in customers who have purchased this product may leave a review.

    X106R Kit Fitting Instructions

    Download / View