Dual Alternator Kit – 12v (LHS) / 24v (RHS) High Mount – LS V8 6.0L, 6.2L (VE-VF)

Dual Alternator Bracket Kit to fit a 12V LHS & 24v RHS High Mount-  LS V8 6.0L, 6.2L (VE-VF)

Marks 4WD have designed and manufactured this dual alternator kit to high mount your factory 12v alternator on the left-hand top and a Bosch 24v alternator to the right-hand top of your 6.0lt VE LS2 or 6.2lt VE/VF LS3 engine.

The kit includes brackets for fitment of both alternators, brackets to mount the power steering reservoir and move the ignition coil pack for clearance, idler pulley, special 6pk 24v alternator pulley, power steering reservoir hose, drive belt and all hardware for installation.

We designed the 6pk pulley to prevent the alternator from over-spinning when fitted to the LS V8 engines.

Specially designed for vehicles needing both a 12v and 24v alternator such as a 4wd running a 24v winch.

Kit Includes

• Alternator Relocation Brackets  12V LHS / 24V RHS (Top mount)
• Power Steering Reservoir Bracket
• Power Steering Hose
• Idler Pulley
• 6pk 24v Alternator Pulley
• Ignition Coil Pack Bracket
• Drive Belt (6PK2705)
• Spacers
• All fixing hardware
• Downloadable Instructions (requires login)

To Suit

• LS V8 (6.0L / 6.2L LS3) (VE – VF)

Notes

• Does not suit the VZ LS 6.0L engine
• If your engine was previously equipped with electric power steering, you will need to swap to a 6.0L / 6.2L power steering pump and reservoir.
• Our drive belt may not fit engines using non-standard pulleys, tensioners or harmonic balancers.