Clutch Kit to suit Holden VT (Getrag Flywheel) 10.5″ 10T Spline
This clutch kit has a runs a heavy duty 10.5″ pressure plate with a with an organic clutch plate, this kits suits the 153T flywheel, this pressure plate has the highest clamping pressure of the MCK117 kits. It requires the use of a flat faced bearing.
- Heavy duty pressure plate
- Clutch plate
- Clutch diagnostic guide
- 153 Tooth GETRAG flywheel
- The pressure plate is located to the flywheel using three 1/4″ dowels and held using six 3/8″ bolts.
- The PCD for both dowels and bolts is 289mm.