Wheel Bearing Kit - GU/GQ Patrol WBK4044

Wheel Bearing Kit - Nissan Patrol GQ & GU - Front

Hydraulic Brake Booster Upgrade - Nissan GU Patrol - MFK20155

Hydraulic Brake Booster Upgrade - GU ABS Patrol with LS2 or LS3 V8 Engine

Nissan GU Patrol Fitted with an LS Engine - Hydraulic Brake Booster Upgrade

In stock

To Suit Nissan Patrol - GU / Y61 non ABS vehicle with an LS V8 engine;

  • VE LS2 / LS3
  • VF LS2 / LS3

Note: Engine must be fitted with an aluminium power steering pump (M14 fitting on pump) to suit this kit.

Bolt in Hydraulic Brake Booster upgrade kit - complete with hoses and all required parts for installation.

$1,295.00 $1,177.27

Hydraulic Brake Booster Upgrade Kit To Suit GU / Y61 Nissan Patrol non ABS Models fitted with an LS engine

We use AC Delco hydraulic brake booster units that we buy from AC Delco in the US. Once they arrive they are stripped and machined so they are a bolt in fit to the Nissan GU Patrols.

The hydraulic brake booster unit runs off the power steering pump in line with the steering box. The vehicles steering remains unaffected. This style of hydraulic unit has been used in braking systems for decades in most Ford and Chevrolet heavy duty vehicles, they are well proven for reliability and performance. The line pressure in the braking system is increased when using the hydraulic unit from around 1,000 PSI up to around 2,000 PSI depending on model. As the pressure is increased we recommend at a minimum to replace your old factory rubber brake lines - we offer ADR approved stainless steel braided brake lines.

We have had the vehicles tested by our engineer and can provide the testing documentation to allow you to get the unit approved into your vehicle.

Advantages of our upgrade kit:

  • Reduced pedal effort
  • Increased stopping power
  • More responsive brake pedal
  • Engineered to meet VSB14 requirements

Kit contains:

  • Genuine AC Delco hydraulic brake booster - modified to suit the Patrol
  • Power steering pump to hydraulic brake booster unit hose
  • Hydraulic brake booster to power steering box hose
  • Low pressure return hose
  • Return line T piece
  • Hose clamps
  • Instructions

Note: Engine must be fitted with an alloy power steering pump (M14 fitting on pump) to suit this kit.

Optional items we recommend fitting when doing the hydraulic brake booster upgrade:

  • ADR approved stainless steel braided brake lines - made to suit your vehicle and suspension lift
  • High temp ceramic brake pads
  • High quality slotted brake rotors
  • New brake master cylinder

 Note: The hoses supplied with this unit will only fit right hand drive vehicles

 Note: Will not suit vehicles fitted with ESC (08/2012 onwards)

Downloads (Account log in required)
(Size: 1 MB) Downloads: 13092
* You have to Login or Register to download this file.