-
Patrol GQ - Delios Slotted Front Brake Rotors (Non EFI Vehicles) (1 x Pair)
AUD $268.18AUD $268.18 (ex. tax)× -
5th Gear Overdrive Ratio Change - LandCruiser HZJ, Hilux Series (from 0.838 to 0.711)
AUD $572.73AUD $572.73 (ex. tax)× -
Bendix Ultimate 4WD Brake Pads - Ford Ranger Px1 / Mazda BT50 (Front Pads)
AUD $213.64AUD $213.64 (ex. tax)× -
5th Gear Overdrive Ratio Set inc Bearing Kit - LandCruiser 76, 78, 79 Series (from .736 to .811)
AUD $1,995.45AUD $1,995.45 (ex. tax)× -
Bendix Ultimate 4WD Brake Pads - Toyota Hilux 2.8D (GUN126) (Front Pads)
AUD $268.18AUD $268.18 (ex. tax)× -
LandCruiser 70, 105 Series - Delios Slotted Front Brake Rotors (1 x Pair)
AUD $281.82AUD $281.82 (ex. tax)× -
Bell Housing Adaptor Kit - Chev V8 Petrol (early) 168 Tooth Flywheel to LandCruiser FJ (Auto)
AUD $3,104.55AUD $3,104.55 (ex. tax)× -
LED Light Stand - FLi OVER-LANDER Telescoping 3 Metres (10ft) Removeable Flashlight, Wireless Remote, USB Powerbank & USB Chargeable
AUD $331.82AUD $331.82 (ex. tax)× -
Accessory Mount Kit - Alternator (RHS) High Mount & A/C Compressor (LHS) Low Mount - LS V8 6.0L, 6.2L (VE-VF)
AUD $540.91AUD $540.91 (ex. tax)× -
Handbrake Shoe Kit - LandCruiser 70 / 80 Series - Prado 90 / 120 Series
AUD $190.91AUD $190.91 (ex. tax)× -
Bell Housing Adaptor Kit - Chev V8 Petrol (late) - 168 Tooth Flywheel to LandCruiser pre 10/1984 (Manual)
AUD $4,000.00AUD $4,000.00 (ex. tax)× -
Integrated Lithium Auxiliary Battery Kit by Cangoee - Isuzu D-Max Mazda BT50 (MY2021 on)
AUD $3,172.73AUD $6,345.45 (ex. tax)× -
Mitsubishi Gen 2 - Low Range Gears - 40% (2.7:1) Reduction (Manual)
AUD $2,177.27AUD $2,177.27 (ex. tax)×
Bell Housing Adaptor Kit – Holden V8 (Turbo Pattern) to Rover (4, 5-speed manual)
AUD $1,995.00 (Excl. Tax AUD $1,813.64)
Bell Housing Adaptor Kit to suit Range Rover / Land Rover Holden V8 engine (turbo pattern) conversion fitted with the factory 4, 5-speed manual
To Suit
- Rover alloy V8 3.5L, 3.9, 4.0L vehicles
- Range Rover County (factory 4,5-speed manual)
- Land Rover Defender (factory 4,5-speed manual)
- Holden V8 (Turbo Pattern)
Bell Housing Adaptor kit to suit Holden V8 (Turbo Pattern) to Rover 4, 5-speed Manual
This kit is made to suit vehicles fitted with the Rover alloy V8 engine (3.5L, 3.9L) with a manual transmission.
The GM V8 engine kit consists of an adaptor plate that bolts to the rear of the engine. The standard Range Rover / Land Rover V8 bell housing then bolts to the rear of the adaptor plate. The transmission does not need repositioning for this conversion as the GM V8 engine has similar external dimensions as the Range Rover / Land Rover V8 engine.
Clutch Kit
A standard 10.5″ GM clutch kit can be used with the Range Rover / Land Rover 4-speed transmission as the clutch spline is the same (10 tooth).
A 10.5″ GM clutch pressure plate and Rover 5-speed clutch plate can be used with the Range Rover / Land Rover 5-speed transmission.
A Range Rover / Land Rover clutch kit can be used but the GM flywheel will need to be re-drilled and tapped to accept it.
Flywheel
The original GM flywheel and starter motor are used for the conversion. The bell housing will need to be modified to allow the starter motor nose to clear. If a hi-torque starter motor is used the bell housing modification can be minimized.
When fitting Chevy petrol engines the smaller 10.5″ 153 tooth flywheel must be used as the larger 11.0″ 168 tooth flywheel will not fit inside the original Range Rover / Land Rover bell housing.
Most Chevy petrol engines imported into Australia were originally fitted to automatic transmissions.
A Range Rover / Land Rover clutch kit can be used but the GM flywheel will need to be re-drilled and tapped to accept it.
Notes
- It will not suit the 4.6L BMW engine and later
- This kit will only suit Turbo pattern engines
- As the original GM flywheel and starter motor are used for the conversion. The bell housing will need to be modified to allow the starter motor nose to clear.
- The front coil springs on the Range Rover / Land Rover will need to be upgraded as the cast iron GM engines are heavier than the alloy Rover V8 engine.
Kit Contains
- Top adaptor plate
- Lower adaptor plate
- Flywheel cover plate
- Thrust bearing spacer
- Spigot bush & adaptor
- Bolts
- Instructions
To Suit
- Rover alloy V8 3.5L, 3.9L vehicles
- Range Rover County (factory 4, 5-speed manual)
- Land Rover Defender (factory 4, 5-speed manual)
- Holden V8 (Turbo Pattern)
Customers reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.