-
Diff Overhaul Kit - LandCruiser 76, 78, 79, 100, 105, 200 Series (Rear)
AUD $404.55AUD $809.09 (ex. tax)× -
Bendix 4WD Brake Pads - Nissan Patrol GQ (Front Pads) Non EFI Models
AUD $104.55AUD $104.55 (ex. tax)× -
Transfer Case Adaptor - 4L60E 6-bolt to Hilux V6 5-Speed, 23T Input Spline (Chain Driven Case)
AUD $3,245.45AUD $3,245.45 (ex. tax)× -
Drive by Wire Pedal Bracket Kit - LS2 / LS3 to Toyota Hilux (2005 - 2015)
AUD $163.64AUD $163.64 (ex. tax)× -
Gear Select Module Install Kit - to suit GM without PRNDL and 6L80
AUD $86.36AUD $86.36 (ex. tax)× -
Fan Shroud & Hose Kit - LS Series V8 to LandCruiser 105 series
AUD $1,031.82AUD $1,031.82 (ex. tax)× -
Engine Chassis Brackets - Chev V8 to Landcruiser 80 / 105 Series
AUD $631.82AUD $631.82 (ex. tax)× -
Bell Housing Adaptor Kit - Chev V8 Petrol - 153 Tooth Flywheel to LandCruiser FJ (Auto)
AUD $3,104.55AUD $3,104.55 (ex. tax)× -
Bell Housing Adaptor Kit - Holden V8 (Turbo Pattern) to LandCruiser 4.5L (5-speed manual)
AUD $3,931.82AUD $3,931.82 (ex. tax)× -
Catch Can & Diesel Fuel Water Separator kit by Ryco - Nissan Navara
AUD $760.00AUD $760.00 (ex. tax)× -
Bell Housing Adaptor Kit - Chev V8 Petrol (late) 168 Tooth Flywheel to LandCruiser 80 Series 4.0L (5-speed manual)
AUD $3,000.00AUD $3,000.00 (ex. tax)× -
Catch Can & Diesel Fuel Water Separator kit by Ryco - Isuzu D-Max, MU-X / Mazda BT50
AUD $760.00AUD $760.00 (ex. tax)× -
LandCruiser 200 Series - Delios Slotted Front Brake Rotors (1 x Pair)
AUD $340.91AUD $340.91 (ex. tax)× -
Handbrake Shoe Kit - LandCruiser 70 / 80 Series - Prado 90 / 120 Series
AUD $190.91AUD $190.91 (ex. tax)× -
Bendix 4WD Brake Rotors - Toyota LandCruiser 105 Series (Rear Rotors)
AUD $359.09AUD $359.09 (ex. tax)× -
LandCruiser 100 Series - Delios Slotted Front Brake Rotors (1 x Pair)
AUD $395.45AUD $395.45 (ex. tax)× -
Alternator Relocation Kit - Alternator (LHS) High Mount - LSA V8
AUD $850.00AUD $850.00 (ex. tax)× -
Bell Housing Adaptor Kit - Chev V8 Diesel to LandCruiser 4.0L (3F 5-speed manual)
AUD $2,509.09AUD $2,509.09 (ex. tax)× -
Water Temperature Sensor Adaptor - 3/8" NPT - M12X1.25 (Chev & Holden V8 to Patrol)
AUD $40.91AUD $40.91 (ex. tax)× -
Bell Housing Adaptor Kit - Chev V8 Petrol (late) - 168 Tooth Flywheel to LandCruiser pre 10/1984 (Manual)
AUD $4,000.00AUD $4,000.00 (ex. tax)× -
Bell Housing Adaptor Kit - Chev V8 Petrol - 153 Tooth Flywheel to LandCruiser FJ Petrol (Manual)
AUD $2,050.00AUD $2,050.00 (ex. tax)× -
Ultra Vision - Hi/Low Switch - LandCruiser 200-300 Series, Hilux GUN, Prado 150
AUD $35.45AUD $35.45 (ex. tax)× -
Bell Housing Adaptor Kit - Chev V8 168T late to Landcruiser 4.5L 5-speed manual
AUD $3,604.55AUD $3,604.55 (ex. tax)×
EFI Fuel Pump, Bracket Kit & Filter- LS V8 Engines
AUD $495.00 (Excl. Tax AUD $450.00)
EFI fuel pump, filter & bracket kit
To Suit
- LS V8 engines
Walbro EFI Fuel Pump, Bracket Kit & Filter to suit LS V8 Engines
The fuel system will need to be upgraded when fitting Chevy LS engines to all vehicles. The engine requires a constant fuel flow with a pressure of 60psi.
For vehicles that were previously carbureted or diesel engines, a surge tank must be used, and for all models, a high-performance EFI fuel pump and a suitable fuel pressure regulator will need to be fitted.
For this application, Marks4WD Adaptors have manufactured an optional stainless steel surge tank that comes with the required brackets, lift pump, fittings, hoses and hose clamps to do the job. The surge tank is supplied with a 1/2″ outlet to supply the EFI pump without restriction.
Marks 4WD Adaptors also stock fuel pressure regulators for the LS engines.
Kit Includes
- High-pressure fuel pump – Walbro
- High-pressure fuel filter
- Fuel pump and damper bracket
- Fuel pump clamp
- High-pressure fuel filter bracket
- Screws, Nuts, Bolts, Washers
- Downloadable Instructions (requires login)
Options
To Suit
- LS V8 engines
Customers reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.