-
Bell Housing Adaptor Kit - Chev V8 Petrol (late) 168 Tooth Flywheel to LandCruiser 80 Series 4.0L (5-speed manual)
AUD $3,000.00AUD $3,000.00 (ex. tax)× -
Bonnet Strut Dual Battery Clearance Bracket - LandCruiser VDJ 70 Series
AUD $56.82AUD $56.82 (ex. tax)× -
Chassis Mount Bracket (Heavy Duty) - Hilux LN / RN (LFS) Single bracket
AUD $200.00AUD $200.00 (ex. tax)× -
Gear Select Module Install Kit - GM 4L60, 65, 70, 80, 85 with PRNDL
AUD $86.36AUD $86.36 (ex. tax)× -
Bendix 4WD Brake Pads - Nissan Patrol GQ (Front Pads) TB42 - EFI Models
AUD $104.55AUD $104.55 (ex. tax)× -
Clutch Kit (Organic Plate) - Chev V8 Petrol 12" - 10 Tooth Spline
AUD $972.00AUD $972.00 (ex. tax)× -
Land Rover - Delios Slotted Front or Rear Brake Rotors (1 x Pair)
AUD $250.00AUD $250.00 (ex. tax)× -
Bell Housing Adaptor Kit - Holden V8 (Turbo Pattern) to LandCruiser 4.5L (Auto)
AUD $2,168.18AUD $2,168.18 (ex. tax)× -
Bendix Ultimate 4WD Brake Pads - Toyota LandCruiser 4.5D (VDJ200) - Front Pads
AUD $213.64AUD $213.64 (ex. tax)× -
Handbrake Shoe Kit - LandCruiser 70 / 80 Series - Prado 90 / 120 Series
AUD $190.91AUD $190.91 (ex. tax)× -
Swivel Housing Overhaul Kit - LandCruiser VDJ76, 78, 79 (Non-ABS) & HZJ70 Series
AUD $313.64AUD $313.64 (ex. tax)× -
Bell Housing Adaptor Kit - Holden V8 (Turbo Pattern) to Rover (4, 5-speed manual)
AUD $1,813.64AUD $1,813.64 (ex. tax)× -
Diff Overhaul Kit - LandCruiser 71, 76, 78, 79, 100, 105, 200 Series - Factory Diff Lock & Spacer (Rear)
AUD $463.64AUD $463.64 (ex. tax)× -
Bendix 4WD Brake Rotors - Toyota LandCruiser 200 Series (Rear Rotors)
AUD $300.00AUD $600.00 (ex. tax)× -
Bendix Ultimate 4WD Brake Upgrade Kit (2" Lift) - Toyota Hilux 2015-On
AUD $980.92AUD $980.92 (ex. tax)× -
Water Temperature Sensor Adaptor - 3/8" NPT - M12X1.25 (Chev & Holden V8 to Patrol)
AUD $40.91AUD $40.91 (ex. tax)×
Mitsubishi Gen 2 – Low Range Gears 40% (2.7:1) Reduction (Auto)
AUD $2,395.00 (Excl. Tax AUD $2,177.27)
Mitsubishi low range gears – ratio 2.7:1 – automatic transmission
To Suit
Generation 2 transfer case – 23 tooth (spline) input gear
- Montero
- Pajero
- Shogun
- Triton
Low Range Gears 40% (2.7:1) Reduction (Auto) to suit Mitsubishi Gen 2
Marks 4WD Adaptors manufacture low range reduction gears to suit many models of Mitsubishi Pajero, Montero, Shogun and Triton. These gears are manufactured in-house at our facility in Melbourne, Australia. We manufacture two reduction ratios for the Generation 2 transfer cases to suit different vehicle applications and requirements.
The 40% reduction gears give you a great overall reduction and suits vehicles fitted with a manual or automatic transmission. These are suited to vehicles used for rock crawling, sand, desert or vehicles that are prone to run away downhill (fitted with an automatic transmission). As an example, this reduction gives a manual vehicle about one gear below where the factory gearing sat. The high range is not altered when fitting our low-range gears.
To calculate your vehicle’s ratio, click here.
Will these Gears fit my Vehicle?
You will need to remove and open the transfer case and check the idler gear has external shoulders for the roller bearings and the face width of the gear must be approximately 30mm and 28mm, respectively. Please see the image below for reference;
Mitsubishi Pajero Gen 2 Low Range Gear Measurements
Features
- 100% Australian Made
- Designed & Manufactured in-house at Marks4wd
Kit Includes
- Input gear
- Idler gear
- Output gear
- Roller bearing
- Seals
To Suit – Mitsubishi
Generation 2 transfer case – 23 tooth (spline) input gear
- Montero
- Pajero
- Shogun
- Triton
Notes
- A Mitsubishi workshop manual is required for fitment
- The input gear spline is 23T – 31.3mm in diameter
Customers reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.